EquipmentVacuum pumps draw the air from the closed system and provide firm, evenly distributed pressure over the entire surface of the part. The size and shape of the mold, and type and quantity of the material being laminated, will determine the minimum pump requirements. Contact ATL Composites for your specific application. The V780 Dry Vane (oil free) vacuum pump delivers high volume air flow and efficient vacuum pressures for wet laminate bagging, core-bedding and veneer bonding applications. Requiring minimal set-up, the V780 can be run continuously with clean, dry air. The V790 Oil Lubricated vacuum pump achieves higher vacuum levels necessary for efficient vacuum infusion processing.
The plumbing system provides an airtight passage from the vacuum envelope to the vacuum pump, allowing the pump to remove air from, and reduce air pressure in, the envelope. The V740B Vacuum Bag Breach Kit consists of a cast aluminium vacuum valve, a quick release coupling and male hose barb, making vacuum bag connections positive and fast. The V740T Transducer Kit converts shop air lines to vacuum without the use of a vacuum pump. The transducer capacity is approximately 3m3/hour. The V740T Kit consists of the Airvac 22 transducer with an integral muffler, a male air line attachment and a male hose barb.
The AIRTECH Resin Infusion Connector (RIC) is a polyethylene UHMW fitting that provides inexpensive and efficient through0bag connection for vacuum manifold and resin feed lines for low temperature resin infusion application.
|
